Code 223 on Fisher & Paykel AquaSmart/EcoSmart top-load washers, such as the WA37T26EW and WA42T26GW, is a Motor Control Module program counter error. The module's processor lost track of where it is in its own instructions.…
Code 223 on Fisher & Paykel AquaSmart/EcoSmart top-load washers, such as the WA37T26EW and WA42T26GW, is a Motor Control Module program counter error. The module's processor lost track of where it is in its own instructions. The control stops the cycle for safety and shows 223 on the display. It happens inside the electronics, not in the water system, and a power reset is the only safe thing to try. Nothing in the tub is damaged.
1. Turn the washer off. 2. Unplug it or switch off the breaker and wait one minute. 3. Reconnect power and run a short rinse empty. 4. When 223 returns, leave the washer off and call us. Do not open the back or control housing.
It tracks which instruction the control processor is carrying out next. When it goes wrong, the module cannot run reliably, so it reports 223. Circuits like this run millions of steps per second.
No, this code points at the control module itself, not at the motor, pump or hoses. Your hoses, filters and the tub are not involved.
Call before running more loads. The washer will not complete a cycle reliably, and an early visit lets us check the module and quote the price.
A technician diagnoses it on site and gives you the price in writing before any work starts.
