Fisher & Paykel Top-Load Washer Code 233: EEPROM read error from the motor control module

What 233 means

On Fisher & Paykel AquaSmart and EcoSmart top-load washers such as the WA37T26EW and WA42T26GW, and SmartDrive Phase 6 models like the GWL15, code 233 is an EEPROM read error. There is a problem reading the EEPROM data coming from the motor control module. The control cannot load its stored settings, so the washer stops and the number appears on the display.

Common causes of 233

EEPROM data unreadable from the motor control module
Memory chip or its connections failing
Corrupted stored data

✓ One safe check you can try

1. Switch the washer off and unplug it for a minute. 2. Plug it back in and try a short empty cycle. 3. Make sure the outlet is solid and the washer is not sharing a power strip. 4. If code 233 stays, stop and book service. Memory work is done on the motor control module with service tools.

! Why to stop there

The memory is on the motor control module and cannot be reached by an owner
Repeated restarts do not repair unreadable data
Replacement modules must be matched and set up correctly

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

KEY LOCFisher & Paykel WH2424 Front-Load Message "KEY LOC": control panel is locked no tAPFisher & Paykel WH2424 Front-Load Message "no tAP": water not reaching the washer out OF bALFisher & Paykel WH2424 Front-Load Message "out OF bAL": load needs rebalancing Sud LOCFisher & Paykel WH2424 Front-Load Message "Sud LOC": too many suds, washer paused 235Fisher & Paykel Top-Load Washer Code 235: Lid lock short circuit 253Fisher & Paykel AquaSmart Top-Load Code 253: SmartPump drawing high current 236Fisher & Paykel Top-Load Washer Code 236: Incompatible EEPROM version 254Fisher & Paykel EcoSmart Code 254: motor control software too old

233233 questions

How is 233 different from code 1?

Code 1 is a write error on the motor control module memory. Code 233 reports a read error: the stored data from the motor control module cannot be read.

Is the data lost?

Possibly. We check whether the module can be recovered or needs replacing, and tell you before any work.

Will you quote first?

Yes. You get the price in writing before work, and repairs have a 30-day workmanship warranty.