Fisher & Paykel EcoSmart Code 60: motor control memory check failed

What 60 means

On Fisher & Paykel AquaSmart and EcoSmart top-load washers such as the WA37T26EW and WA42T26GW, and SmartDrive Phase 4 to 6 washers like the GWL15, code 60 means that on power-up the Motor Control Module checked its memory against a known reference and found differences. The owner sees 60 as soon as the washer is switched on, and the washer may refuse to run.

Common causes of 60

Motor control memory corrupted
Motor Control Module failing
Power disturbance

✓ One safe check you can try

1. Unplug the washer for five minutes. 2. Plug in directly to a wall outlet. 3. Switch on and note whether 60 appears. 4. If it does, stop and call us.

! Why to stop there

A memory difference inside the module is not something a restart repairs
The module usually needs replacement
We quote in writing first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

KEY LOCFisher & Paykel WH2424 Front-Load Message "KEY LOC": control panel is locked no tAPFisher & Paykel WH2424 Front-Load Message "no tAP": water not reaching the washer out OF bALFisher & Paykel WH2424 Front-Load Message "out OF bAL": load needs rebalancing Sud LOCFisher & Paykel WH2424 Front-Load Message "Sud LOC": too many suds, washer paused 248Fisher & Paykel AquaSmart Code 248: Smart Pump top-up error 232Fisher & Paykel Top-Load Washer Code 232: Communications timeout after 5 seconds 249Fisher & Paykel AquaSmart Code 249: pump timed out, no level change 233Fisher & Paykel Top-Load Washer Code 233: EEPROM read error from the motor control module

6060 questions

How is 60 different from 45?

45 is the display memory check; 60 is the motor control memory check.

Could it be temporary?

A power disturbance can cause it once, so one restart is reasonable.

Is the washer safe to use?

It will not run with the error present, so it stays off until fixed.