Fisher & Paykel Oven Code F1 01: Clock Board Cannot Find Power Board

What F1 01 means

On current Fisher & Paykel OB24 and OB30 Series 7 and 9 built-in ovens such as the OB30SDPTX1 and OB24SDPTX1, F1 codes come from the clock board, and F1 01 is an initialization error. The clock board found no power board when it started up. The display shows the code, and the oven cannot heat because the two boards are not connected in conversation.

Common causes of F1 01

A loose or damaged cable between the clock board and the power board
A power board that is not starting
A clock board that cannot detect the power board
A momentary start-up glitch

✓ One safe check you can try

1. Turn the oven off at the breaker, wait one minute, and switch it back on. 2. Set the clock if prompted. 3. Try a short bake. 4. If F1 01 comes back, leave the breaker off and call us. Please do not open the oven or the control housing; the wiring between the boards carries mains-connected circuits.

! Why to stop there

The two boards share a connection that only a technician should check.
It can be the cable, the clock board or the power board, and guessing is expensive.
We test before ordering and quote the repair in writing.
You are covered by our 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F2 13Fisher & Paykel Oven Code F2 13: Cavity Temperature Sensor Open or Shorted F2 14Fisher & Paykel Oven Code F2 14: Oven Not Heating on Bake F3Fisher & Paykel Oven Code F3: Cavity Over 600 F in Normal Cooking E128Fisher & Paykel OB24SDPX1 Code E128: EEPROM Communication Error F4Fisher & Paykel Oven Code F4: Power Module Problem F1Fisher & Paykel Oven Code F1: Electronics Area Too Hot F5Fisher & Paykel Oven Code F5: Clock and Power Modules Not Communicating F1 02Fisher & Paykel Oven Code F1 02: Clock Board Does Not Support Model ID

F1 01F1 01 questions

What are the clock board and power board?

The clock board is the display and control you touch. The power board switches the heating elements and fans. They must talk to each other for the oven to work.

Does F1 01 mean the power board is dead?

Not necessarily. It only says the clock board found no power board at start-up. A cable, the power board or a one-time glitch could be behind it.

Will resetting at the breaker help?

It is worth one try because a start-up glitch can clear. If the code appears again, the connection or a board needs inspection. Please do not repeat it many times.