Fisher & Paykel Oven Code F2 02: Power Board Rejects Model ID

What F2 02 means

Fisher & Paykel OB24 and OB30 Series 7 and 9 built-in ovens, including the OB30SDPTX1 and OB24SDPTX1, show F2 02 when the power board reports an unknown model ID. The power board does not support the model ID it was given. The board and the oven setup do not match, so the oven cannot start normally, and the display shows the code.

Common causes of F2 02

A power board that does not match this oven
A recent board replacement with the wrong version
A model setting that has been corrupted
A clock board passing a model ID the power board cannot use

✓ One safe check you can try

1. Turn the oven off at the breaker for one minute and back on. 2. If a board was recently replaced, tell the technician who did the work. 3. Do not attempt to change any settings. 4. If F2 02 stays, call us and have the oven's complete model number ready from its rating label.

! Why to stop there

A mismatched board needs the correct part, not another restart.
We compare your model number with the installed power board before suggesting anything.
Buying the wrong board is a costly mistake, so we check first.
The quote is written, and a 30-day workmanship warranty backs the work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F2 03Fisher & Paykel Oven Code F2 03: Power Board General Software Error F2 04Fisher & Paykel Oven Code F2 04: Clock Board Not Answering the Power Board F2 07Fisher & Paykel Oven Code F2 07: Door Opened During Self Clean F2 13Fisher & Paykel Oven Code F2 13: Cavity Temperature Sensor Open or Shorted F2 14Fisher & Paykel Oven Code F2 14: Oven Not Heating on Bake F3Fisher & Paykel Oven Code F3: Cavity Over 600 F in Normal Cooking E128Fisher & Paykel OB24SDPX1 Code E128: EEPROM Communication Error F4Fisher & Paykel Oven Code F4: Power Module Problem

F2 02F2 02 questions

Is F2 02 the same as F1 02?

They are similar but come from different boards. F1 02 is the clock board rejecting the ID, and F2 02 is the power board saying it does not support the model ID.

Does it come after a repair?

Often, yes. A replacement board built for a different model can trigger it. If your oven worked before, a corrupted setting is also possible. Tell us if any board was replaced before.

Can I fix it with a factory reset?

No setting on the display will correct a model ID that the board rejects. Matching or reprogramming the board is a technician task. We bring the right board and set it up for your model.