Fisher & Paykel Range Code F1 08: Clock Board I2C Communication Error

What F1 08 means

On current Fisher & Paykel OR30 and OR36 Series 7 and 9 ranges, such as the OR30SCG6X1, and pro ranges like the RDV3-304 and RIV3-486, F1 08 is an I2C communication error reported by the clock board. It cannot talk properly with the power board. The advice is to check the connection to the power board and replace the power board if needed. The display shows F1 08.

Common causes of F1 08

A loose or damaged connection to the power board
A power board that has stopped communicating
Damaged wiring between the boards
A power disturbance during operation

✓ One safe check you can try

1. Switch the range off at its breaker, wait a minute, and turn it back on. 2. Set the clock and try a short bake. 3. If F1 08 does not return, carry on normally. 4. If it repeats, leave the breaker off and call us. Do not pull the range out or open any panel. On gas models, if you smell gas, leave the house and call the gas utility from outside.

! Why to stop there

I2C is the internal link between boards, and a problem there can be a cable or either board.
Ranges carry high-current circuits that are not safe for owners to open.
We check the connection first and replace the power board only if it is the cause.
You see a written price in advance, and a 30-day workmanship warranty follows.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

F2 18Fisher & Paykel Current Range Code F2 18: Power Board Oscillator Error F2 19Fisher & Paykel Current Range Code F2 19: Fan Stall Error A1Fisher & Paykel Current Range Alert A1: Oven Overheated, Cool Before Use A2Fisher & Paykel Range Alert A2: Door Cannot Lock for Self Clean A3Fisher & Paykel Range Alert A3: Door Stays Locked After Self Clean Er03Fisher & Paykel Induction Range Code Er03: Touch Control Area Covered or Wet F0-00Fisher & Paykel Legacy Range Code F0-00: Self-Clean Temperature Sensor Error F1 19Fisher & Paykel Range Code F1 19: Knob Encoder Connection to Clock Board

F1 08F1 08 questions

What is I2C?

It is the short internal data line the boards use to exchange messages. F1 08 means the clock board's messages are not getting through to the power board cleanly.

Why would the power board be replaced?

If the connection checks out and the power board still does not respond, the board itself is the cause. We confirm before quoting a replacement.

Does F1 08 affect the cooktop?

It depends on the model and how the boards divide the work. Tell us what still functions when you call, and we will plan the visit accordingly.