Fisher & Paykel Current Range Alert A1: Oven Overheated, Cool Before Use

What A1 means

On current Fisher & Paykel OR30 and OR36 Series 7 and 9 ranges and RDV3 and RIV3 pro ranges such as the RDV3-304 and RIV3-486, A1 means the oven has overheated. This is an alert, not a breakdown. The display shows A1 while the oven is too hot, and the code disappears once the oven has cooled and the door has unlocked.

Common causes of A1

Oven cavity ran hotter than the set temperature, for example after a long self-clean or a high bake
Door lock still engaged while the oven is cooling
Vent path partly blocked by foil or a pan so heat could not escape

✓ One safe check you can try

1. Turn the oven off and leave the door alone. 2. Wait for it to cool; the door unlocks by itself when the temperature is safe. 3. Keep vents at the back of the cooktop and around the door clear. 4. Once A1 is gone, start your next bake normally. If A1 returns on ordinary use, call us.

! Why to stop there

A1 clears itself on cooling, so no repair is needed the first time.
Forcing the door open while it is hot can burn you and damage the latch.
If A1 repeats at normal temperatures, we check the temperature control and fans, and quote in writing first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

A2Fisher & Paykel Range Alert A2: Door Cannot Lock for Self Clean A3Fisher & Paykel Range Alert A3: Door Stays Locked After Self Clean Er03Fisher & Paykel Induction Range Code Er03: Touch Control Area Covered or Wet F0-00Fisher & Paykel Legacy Range Code F0-00: Self-Clean Temperature Sensor Error F1 08Fisher & Paykel Range Code F1 08: Clock Board I2C Communication Error F1 19Fisher & Paykel Range Code F1 19: Knob Encoder Connection to Clock Board F2Fisher & Paykel Legacy Range Code F2: Relay Transistor Short or Low Supply Voltage F2 05Fisher & Paykel Current Range Code F2 05: Door Lock Mechanism Error

A1A1 questions

How long until A1 goes away?

The code clears after the oven has cooled enough for the door to unlock. That can take a while after a long cycle, so just leave the oven off and the door alone.

Does A1 mean something broke?

Not by itself. It is a warning that the cavity got too hot. If it appears often on normal bakes, then the temperature control needs a look.

Can I cook on the cooktop with A1 on?

Yes in most cases. The alert concerns the oven cavity. Keep clear of the hot oven door and vents, and let us know if the alert repeats.