Fisher & Paykel Range Alert A3: Door Stays Locked After Self Clean

What A3 means

Fisher & Paykel OR30 and OR36 Series 7 and 9 ranges, such as the OR30SCG6X1 and OR36SDG6X1, and pro ranges like the RDV3-304 and RDV3-486GD, show A3 when the door cannot be unlocked after a Self Clean cycle has finished. The oven is cool, yet the door stays shut. Powering off and on, then pressing gently on the door, often lets the lock release.

Common causes of A3

A lock stuck in the locked position
A lock motor or switch that did not retract
Pressure on the door holding the latch tight
A control that does not command the unlock

✓ One safe check you can try

1. Make sure the oven has cooled completely. 2. Turn the range off at the wall for about ten seconds and on again. 3. Press gently on the door toward the oven while the lock tries to release; do not pull hard. 4. Wait a few minutes and retry. 5. If the door stays locked or A3 returns, call us.

! Why to stop there

Forcing a locked door can bend the latch or damage the hinges.
The lock assembly is hidden inside the oven's front frame.
We free and test the lock, then explain the options before work.
A written price comes first, and the repair carries a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

A1Fisher & Paykel Current Range Alert A1: Oven Overheated, Cool Before Use A2Fisher & Paykel Range Alert A2: Door Cannot Lock for Self Clean Er03Fisher & Paykel Induction Range Code Er03: Touch Control Area Covered or Wet F0-00Fisher & Paykel Legacy Range Code F0-00: Self-Clean Temperature Sensor Error F1 08Fisher & Paykel Range Code F1 08: Clock Board I2C Communication Error F1 19Fisher & Paykel Range Code F1 19: Knob Encoder Connection to Clock Board F2Fisher & Paykel Legacy Range Code F2: Relay Transistor Short or Low Supply Voltage F2 05Fisher & Paykel Current Range Code F2 05: Door Lock Mechanism Error

A3A3 questions

How long should I wait after cleaning?

Give the range at least an hour after the cycle ends so it is fully cool. Then reset the power and press gently on the door while the lock tries to release.

Will the cooktop work while the door is locked?

Yes, the surface is separate from the oven door lock. You can cook on top while the door remains stuck, but you will need a repair to open the oven.

Why does it happen after cleaning?

Cleaning heats the cavity a great deal. If the lock motor or switch sticks after that heat, the door will not unlock and A3 appears.