Fisher & Paykel Legacy Range Code F0-00: Self-Clean Temperature Sensor Error

What F0-00 means

On older freestanding Fisher & Paykel ranges like the OR24SDPWGX1, OR36SDBGX1 and OR48DDPWGX1, F0-00 appears when the temperature sensor measurement fails during a self-clean cycle. It can happen if the cycle was stopped and started midway. The display shows F0-00 and the cleaning cycle ends without finishing. The cleaning cycle simply ends early and the door stays locked until the oven cools, so racks and anything left inside have to wait for you. Normal baking is not always affected.

Common causes of F0-00

Self-clean cycle interrupted and restarted partway
Door lock not engaging properly during the cycle
Broil or bottom element, relays or safety thermostat not behaving normally
Selector contacts or thermal overload tripping

✓ One safe check you can try

1. Turn the selector to OFF. 2. Wait at least 15 minutes with the door closed and the oven cooling. 3. Remove racks and loose crumbs, then start the self-clean once more without interrupting it. 4. If F0-00 appears again, leave the oven off and call us.

! Why to stop there

Door lock, relays and thermostat checks need meter readings inside the range.
Running another cycle on a failing element or lock can overheat the cabinet.
We work through the checks in order and give a written quote before any part is replaced.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Er03Fisher & Paykel Induction Range Code Er03: Touch Control Area Covered or Wet F1 08Fisher & Paykel Range Code F1 08: Clock Board I2C Communication Error F1 19Fisher & Paykel Range Code F1 19: Knob Encoder Connection to Clock Board F2Fisher & Paykel Legacy Range Code F2: Relay Transistor Short or Low Supply Voltage F2 05Fisher & Paykel Current Range Code F2 05: Door Lock Mechanism Error F2 18Fisher & Paykel Current Range Code F2 18: Power Board Oscillator Error F2 19Fisher & Paykel Current Range Code F2 19: Fan Stall Error A1Fisher & Paykel Current Range Alert A1: Oven Overheated, Cool Before Use

F0-00F0-00 questions

Did I cause F0-00 by stopping the clean cycle?

Possibly. Stopping and restarting the cycle midway can upset the temperature reading. Waiting 15 minutes and running one clean without interruption often clears it. Power dips and an interrupted cycle are the usual reasons it shows up in the first place.

What if the code returns?

Then something in the cycle path is not working, such as the door lock, a relay, the safety thermostat or the broil or bottom element. We test those one at a time.

Can I still bake normally?

Often yes, because the code points at the self-clean cycle. If baking also acts oddly, stop and call us for a written quote and our 30-day workmanship warranty.