Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Fisher & Paykel specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 322-9727 Request a Repair
Model library · Fisher & Paykel Range

OR24SDMBGX2N

Fisher & Paykel OR24SDMBGX2N Compact Gas Range Repair

Fisher & Paykel range

Most common issues on this model

  1. Burner igniter clicking without lighting
  2. Oven temperature running off because of a drifting sensor
  3. Burner ports clogged with dried spills
  4. Oven door seal worn and letting heat out

The OR24SDMBGX2N is a 24-inch natural gas range, the kind that goes into a condo, a city apartment, a guest suite or a small galley kitchen where a 30-inch opening will not fit. Four sealed burners sit on top, and the narrow oven below heats and cools quickly.

Because the cavity is small, a tired door gasket shows up in your baking sooner than it would in a wider oven. We start with the seal, then test the oven sensor against a reference thermometer, then pull the burner caps and clear the ports. If a burner clicks but never catches, the igniter or its wiring gets measured before anything is replaced.

If you ever smell gas, leave the home and call the gas utility from outside. After that, call us for the repair. You get a written price before we start and a 30-day workmanship warranty.

Key features

  • 24-inch freestanding gas range with four sealed burners
  • Natural gas
  • Contemporary styling
  • Series 5
→Codes

Error codes this model can show

OR24SDMBGX2NOR24SDMBGX2N questions
Will a 24-inch range fit in a standard 30-inch cutout?

No, the cabinet opening has to match the 24-inch width. Filler panels can close a wider gap in some kitchens, but we advise confirming the gas shutoff location and clearances before any move.

Why does my small oven swing in temperature?

A compact cavity loses heat fast through a worn gasket, and a drifting sensor adds to the swing. We check the seal for gaps, then compare the dial setting with a measured temperature.

One burner clicks and stays dark. What do you check?

We clean the port and cap first, since dried spill blocks the flame path. If it still will not light, we test the igniter and spark wiring and replace the part that fails.

Book a visit

Book repair for your OR24SDMBGX2N

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Request a Repair