Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Fisher & Paykel specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 322-9727 Request a Repair
Error code · Washer

Fisher & Paykel EcoSmart Code 68: pressure transducer count too high

On Fisher & Paykel AquaSmart and EcoSmart top-load washers such as the WA37T26EW and WA42T26GW, code 68 means the pressure transducer has measured a water level far above what the washer should physically be able to…

Medium · inspection needed
Request a Repair(713) 322-9727
Code
68
Appliance
Washer
Brand
Fisher & Paykel
Warranty
30-day workmanship

What 68 means

On Fisher & Paykel AquaSmart and EcoSmart top-load washers such as the WA37T26EW and WA42T26GW, code 68 means the pressure transducer has measured a water level far above what the washer should physically be able to measure. This suggests the pressure sensor has been disconnected from the Motor Control Module, damaged or not actually placed on the board. The owner sees 68.

Common causes of 68

  • Pressure sensor disconnected or not seated
  • Pressure sensor damaged
  • Board connection issue
✓ One safe check you can try

1. Unplug the washer. 2. Do not open the cabinet. 3. Plug in and try one cycle. 4. If 68 returns, call us.

! Why to stop there
  • The sensor is on the control board
  • We check the seating and sensor
  • A written price comes first
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

KEY LOCFisher & Paykel WH2424 Front-Load Message "KEY LOC": control panel is locked no tAPFisher & Paykel WH2424 Front-Load Message "no tAP": water not reaching the washer out OF bALFisher & Paykel WH2424 Front-Load Message "out OF bAL": load needs rebalancing Sud LOCFisher & Paykel WH2424 Front-Load Message "Sud LOC": too many suds, washer paused 247Fisher & Paykel AquaSmart Code 247: Smart Pump flapper error 248Fisher & Paykel AquaSmart Code 248: Smart Pump top-up error 232Fisher & Paykel Top-Load Washer Code 232: Communications timeout after 5 seconds 249Fisher & Paykel AquaSmart Code 249: pump timed out, no level change
6868 questions
Why is the level impossible?

The reading is higher than the tub could hold, so the sensor is not connected properly or is damaged.

Is 68 like 69 and 70?

They are all pressure transducer errors but at different readings.

Can it overfill?

If the level is misread, yes.

Book a visit

Still seeing 68?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 322-9727
☎ Call the desk ▤ Request a Repair