Fisher & Paykel Oven Alert A2: Door Will Not Lock for Self Clean

What A2 means

On Fisher & Paykel OB24 and OB30 Series 7 and 9 built-in ovens such as the OB30SDPTX1, OB30DDPTDX1 and OB24SDPTX1, A2 is a door lock error. The door could not be locked after you started a Self Clean cycle, so the cycle will not run. You will see A2 on the display. The first remedy is to power the oven off at the wall and on again.

Common causes of A2

A door that is not closed firmly enough to lock
Debris or grease on the door latch area
A door lock motor or switch that is not engaging
A control that has not registered the locked state

✓ One safe check you can try

1. Cancel the cycle and let the oven cool if it is warm. 2. Turn the oven off at the wall, wait about ten seconds, then turn it back on. 3. Set the clock again. 4. Close the door firmly, making sure nothing sits in the way, and start Self Clean again. 5. If A2 returns, stop trying and call us.

! Why to stop there

A lock that will not engage during self clean is a safety stop, and it should not be bypassed.
Telling a worn lock mechanism from a control problem needs testing.
We check the latch and lock together, and quote in writing first.
A 30-day workmanship warranty covers the work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

A2A2 questions

Is it safe to run self clean without the lock?

No. Self clean reaches very high temperatures, and the lock keeps the door shut. The oven refuses to start for this reason, so please do not look for workarounds.

I reset the power and A2 is gone. Am I done?

If Self Clean now starts and locks, the reset cleared a glitch. If A2 comes back the next time you try, the lock should be inspected.

Does A2 affect normal baking?

Usually not. It concerns the lock during Self Clean. You can still bake, but if the lock is failing, it can show up there too, so tell us when you call.