Fisher & Paykel RF201AHJSX1 French Door Troubleshooting
With 20.1 cu. ft. in a French door layout, the RF201AHJSX1 makes ice inside the cabinet but keeps the door free of a dispenser. Only one small supply tube is involved, so a drop in ice traces back to that tube or the valve feeding it.
Cubes that fuse in the bin during light use tell us the ice is melting a little and refreezing. We check the temperature near the bin, the door seal beside it and the ice maker cycle. Fill problems send us to the tube, the valve and the inlet screen. Before leaving, we empty the bin, run a fresh cycle and check that new cubes drop loose rather than in a frozen block.
We state the price in writing before starting, and a 30-day workmanship warranty follows the work.
Clumps form when ice partly melts and refreezes, which happens with light use or a temperature swing near the bin. We check the freezer temperature, the seal and the ice maker cycle.
The supply tube can freeze or kink, the valve can fail, or the inlet screen can clog. We test water reaching the valve, then the valve itself, and then the ice maker module.
Now and then. Loaded door bins can drag a hinge down and open a gap at the center. We tighten and shim the hinge so the gasket meets evenly and cold air stays in.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
