On Fisher & Paykel AquaSmart and EcoSmart top-load washers such as the WA37T26EW and WA42T26GW, code 69 is a pressure transducer error where the zero reading is too low. The washer sets its empty-tub reference at…
On Fisher & Paykel AquaSmart and EcoSmart top-load washers such as the WA37T26EW and WA42T26GW, code 69 is a pressure transducer error where the zero reading is too low. The washer sets its empty-tub reference at the start, and a zero that is too low means that reference is off. The owner sees 69 and the washer cannot trust its water level.
1. Unplug the washer. 2. Make sure the tub is empty. 3. Plug in and run a short cycle. 4. If 69 returns, call us.
It is the empty-tub reading the washer uses as its starting point.
69 is a zero that is too low; 70 is too high.
A tub with water at start can disturb the zero, so empty it.
A technician diagnoses it on site and gives you the price in writing before any work starts.
