Fisher & Paykel Oven Code F2 01: Power Board Cannot Find Clock Board

What F2 01 means

On current Fisher & Paykel OB24 and OB30 Series 7 and 9 built-in ovens such as the OB30SDPTX1 and OB30DDPTDX1, F2 codes come from the power board, and F2 01 is an initialization error. The power board found no clock board at start-up. The display, if it lights, shows the code, and the oven cannot run a cycle without its control talking to the power board.

Common causes of F2 01

A loose or damaged cable between the power board and clock board
A clock board that is not starting up
A power board that cannot detect the clock board
A start-up glitch after a power interruption

✓ One safe check you can try

1. Turn the oven off at the breaker, wait a full minute, and switch it on. 2. Set the clock if prompted. 3. Try a short bake. 4. If F2 01 persists, leave the breaker off and call us. Please do not open the oven or remove the control; the boards connect through circuits that are not safe to handle.

! Why to stop there

Whether the cable or one of the boards has failed is revealed only by testing.
The wiring lives in a housing with mains-connected parts.
We check before ordering any board, then quote in writing.
Repairs come with a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F2 01F2 01 questions

How is F2 01 different from F1 01?

F1 01 is the clock board saying it cannot find the power board. F2 01 is the reverse, with the power board saying it cannot find the clock board.

Why might the display be blank?

If the clock board is the part not starting, the display may stay dark, and the oven shows nothing. A technician can still read the situation from the power board.

Will a reset fix it?

It can clear a start-up glitch. If F2 01 returns, a connection or board has a real problem that needs inspection. Do not keep resetting it repeatedly.