Fisher & Paykel Oven Code F1 11: Clock Board Critical Error

What F1 11 means

On current Fisher & Paykel OB24 and OB30 Series 7 and 9 built-in ovens such as the OB30SDPTX1 and OB30DDPTDX1, F1 11 means the clock board reports a critical software or hardware error. The display shows the code, and the control stops what it was doing. The suggested steps are to cycle the power and, if that does not help, replace the clock board.

Common causes of F1 11

A clock board with a serious internal error
A power disturbance that upset the board
A board damaged by heat or moisture
A software crash that a restart can clear

✓ One safe check you can try

1. Switch the oven off at the breaker, wait at least a minute, and turn it back on. 2. Set the clock and run a short bake. 3. If the oven works and F1 11 stays away, carry on as normal. 4. If the code returns, keep the breaker off and call us. Opening the display or control housing is not safe for an owner.

! Why to stop there

A critical clock board error that survives a restart normally calls for a new board.
The board is inside the control housing, close to live parts.
We verify the cause before replacing, so you do not pay twice.
You see a written quote first, and a 30-day workmanship warranty follows.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F2 13Fisher & Paykel Oven Code F2 13: Cavity Temperature Sensor Open or Shorted F2 14Fisher & Paykel Oven Code F2 14: Oven Not Heating on Bake F3Fisher & Paykel Oven Code F3: Cavity Over 600 F in Normal Cooking E128Fisher & Paykel OB24SDPX1 Code E128: EEPROM Communication Error F4Fisher & Paykel Oven Code F4: Power Module Problem F1Fisher & Paykel Oven Code F1: Electronics Area Too Hot F5Fisher & Paykel Oven Code F5: Clock and Power Modules Not Communicating F1 01Fisher & Paykel Oven Code F1 01: Clock Board Cannot Find Power Board

F1 11F1 11 questions

Is F1 11 more serious than F1 03?

Yes. F1 03 is a general software error, while F1 11 is labeled critical. Both are on the clock board, but F1 11 more often ends with a board replacement.

Can I keep cooking if it clears?

If a reset clears it and it does not return, you can. If it returns, even occasionally, we suggest scheduling the repair before the board fails completely.

How long does a clock board replacement take?

Usually a single visit when the part is available. We confirm the part number from your model first, then quote the work in writing. The oven is usable again right after.