Fisher & Paykel RF178WRNJX1 French Door Tune-up
Here is an 18.2 cu. ft. Series 7 cabinet that makes ice inside the freezer but has no dispenser in the door. The RF178WRNJX1 needs one small water line to the ice maker, and that line is where we look when cubes stop.
When frost appears in the freezer, the compressor is rarely the cause. We check whether the right-hand door closes flush, since a hinge sagging under a loaded shelf lets humid air in. If the seal is fine, we move on to the defrost heater and the ActiveSmart sensor. We finish by timing a full ice cycle so you leave knowing the bin is filling again.
Before any work we give you a written price, and our repairs carry a 30-day workmanship warranty.
We start with the water line and the fill valve, because a pinched or frozen tube starves the mold. Then we test the ice maker module. Cubes return once the fill is restored.
Frost returns when moisture keeps entering or the defrost cycle is not melting the evaporator. We test the door seal first, then the heater, sensor and drain, so the fix addresses the source.
Yes. We read the sensor resistance at a known temperature and compare it with the expected value. A drifting sensor gets replaced, and a good one stays, so you only pay for a part that needed changing.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
