Fisher & Paykel SmartLoad Dryer Code 22: Door Actuator Open Circuit

What Code 22 means

Code 22 on Fisher & Paykel SmartLoad and AeroSmart dryers, including the DEGX1, DGGX1, DE27CW1 and DG27CW1, tells you the door actuator is reading as an open circuit. The dryer cannot send current through the part that moves and locks the door, so it does not know the door can be secured. The display shows the code and the cycle will not run.

Common causes of Code 22

A loose or disconnected plug on the door actuator wiring
A broken wire between the control and the actuator
A door actuator whose internal winding has failed
A control output that no longer drives the actuator

✓ One safe check you can try

1. Switch the dryer off and unplug it, or turn off its breaker, for about ten minutes. 2. Check that the door closes fully and nothing is caught in it. 3. Restore power and try the cycle again. 4. If the display repeats Code 22, leave the dryer off. Do not remove any panels to look at wiring; that work belongs to a technician.

! Why to stop there

An open circuit means a break somewhere in the wiring or the part, and finding it needs a meter on the connections.
The panels that hide the actuator wiring sit near mains power.
Replacing the wrong part wastes money, so we confirm which one is open first.
You get the price in writing before work begins, and the repair carries our 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

Code 15Fisher & Paykel AeroSmart Dryer Code 15: unstable reading from sensor module Code 16Fisher & Paykel SmartLoad Dryer Code 16: airflow restriction Code 20Fisher & Paykel SmartLoad Dryer Code 20: door actuator stalled Code 21Fisher & Paykel SmartLoad Dryer Code 21: Door Actuator Needs Too Much Voltage Code 1Fisher & Paykel SmartLoad Dryer Code 1: sensor and motor control not talking Code 23Fisher & Paykel SmartLoad Dryer Code 23: Door Actuator Stopped by Low Line Voltage Code 2Fisher & Paykel SmartLoad Dryer Code 2: drum gap not found Code 24Fisher & Paykel SmartLoad Dryer Code 24: Door Actuator Slow to Move

Code 22Code 22 questions

What does open circuit mean on a dryer?

It means electricity cannot complete its path through a part. For Code 22 that part is the door actuator or its wiring, so the dryer sees nothing there and stops.

Will turning the dryer off and on fix it?

A power reset clears the display, but it does not repair a broken connection. If the actuator circuit is open, the code comes straight back on the next start.

Is it dangerous to leave the dryer plugged in?

Not usually while it sits idle, but we suggest unplugging it until it is repaired. The dryer will not run a cycle with this code anyway.