Fisher & Paykel AeroSmart Dryer Code 15: unstable reading from sensor module

What Code 15 means

On Fisher & Paykel AeroSmart dryers such as the DE27CW1 and DG27CW1, Code 15 means an unstable reading was received from the sensor module. The code appears in the AeroSmart list only, not the SmartLoad list. Owners see Code 15 and the dryer stops mid-cycle, because the control cannot rely on what the sensor module reports. The code is listed for these two models.

Common causes of Code 15

Sensor module reporting an unstable value
Loose wiring to the sensor module
Sensor module that has failed

✓ One safe check you can try

1. Switch the dryer off and unplug it for one minute. 2. Restore power, close the door and start a short cycle. 3. Empty and clean the lint screen. 4. If Code 15 shows again, stop using the dryer and call us. Do not open the back panel.

! Why to stop there

The module is inside the cabinet with mains wiring.
We confirm the cause before ordering a new module.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

Code 15Code 15 questions

Why is Code 15 only on AeroSmart dryers?

The code is listed for the AeroSmart DE27CW1 and DG27CW1. The SmartLoad dryers use other codes in their list, so check your model before comparing.

Does Code 15 mean the drum sensor is dirty?

The code is about an unstable reading from the module itself. Lint can affect airflow, but a repeating Code 15 after cleaning points to the module or its connection.

How soon can you look at it?

Call us and we will book a visit, usually within a few days of your request. After testing, we give a written price. Our 30-day workmanship warranty covers the parts we replace.