Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Fisher & Paykel specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 322-9727 Request a Repair
Error code · Wall Oven

Fisher & Paykel OB24SDPX1 Message “DOOR”: Door Not Sensed as Closed

On the Fisher & Paykel OB24SDPX1 built-in 24-inch oven, the display message "DOOR" means the door is not closed, or the control cannot verify a closed position through the door lock microswitch while you are choosing…

Medium · inspection needed
Request a Repair(713) 322-9727
Code
DOOR
Appliance
Wall Oven
Brand
Fisher & Paykel
Warranty
30-day workmanship

What DOOR means

On the Fisher & Paykel OB24SDPX1 built-in 24-inch oven, the display message "DOOR" means the door is not closed, or the control cannot verify a closed position through the door lock microswitch while you are choosing a self clean mode. The oven will not start the self clean selection until it sees the door as closed and locked. Nothing else about the oven is described by this message.

Common causes of DOOR

  • A door that is not fully shut
  • Something resting on the door or in the seal
  • A door lock microswitch that does not register closure
  • A door lock mechanism that is out of position
✓ One safe check you can try

1. Open the door fully, then close it firmly and check that nothing blocks the frame or seal. 2. Wipe away any grease or debris around the latch area when the oven is cool. 3. Choose the self clean mode again. 4. If "DOOR" still appears with the door closed, switch the oven off at the breaker for a minute and retry. 5. If it remains, call us.

! Why to stop there
  • The microswitch is part of the door lock assembly and sits behind the oven's front frame.
  • Self clean needs a verified lock, so it is not wise to override it.
  • We test the switch and lock before replacing anything.
  • You receive a written price first, and a 30-day workmanship warranty follows the work.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Wall Oven codes

E128Fisher & Paykel OB24SDPX1 Code E128: EEPROM Communication Error F3Fisher & Paykel Oven Code F3: Cavity Over 600 F in Normal Cooking F1Fisher & Paykel Oven Code F1: Electronics Area Too Hot F4Fisher & Paykel Oven Code F4: Power Module Problem F1 01Fisher & Paykel Oven Code F1 01: Clock Board Cannot Find Power Board F5Fisher & Paykel Oven Code F5: Clock and Power Modules Not Communicating F1 02Fisher & Paykel Oven Code F1 02: Clock Board Does Not Support Model ID F7Fisher & Paykel Oven Code F7: Door Lock Problem
DOORDOOR questions
The door looks closed. Why does it say DOOR?

The control relies on a microswitch in the door lock, not on what you can see. If that switch does not register closure, the message appears even with the door shut.

Does this stop normal baking?

The message appears while selecting a self clean mode, so ordinary baking is usually unaffected. A switch that has gone bad can still cause other door-related trouble over time.

Can I clean the switch myself?

Wiping the visible latch area when cool is fine. The switch itself is inside the lock assembly, and we recommend leaving that to a technician.

Book a visit

Still seeing DOOR?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 322-9727
☎ Call the desk ▤ Request a Repair