Fisher & Paykel ActiveSmart Refrigerator Code F34: Both water dispenser solenoid drivers failed

What F34 means

On Fisher & Paykel ActiveSmart ice and water refrigerators in the E522B series, such as the E522BRXFDU and E522BLXFDU, F34 means both water dispenser solenoid drivers, 1 and 2, have failed. The display board can no longer switch the dispenser valve solenoids that release water. You will see the code and the dispenser may give little or no water, while the cooling side of the fridge usually keeps running.

Common causes of F34

Both dispenser solenoid drivers on the display module failed
Dispenser water solenoid with the wrong resistance
Display module needing replacement if the solenoids test well

✓ One safe check you can try

1. Press the dispenser lever and note whether any water comes out. 2. Unplug the refrigerator for five minutes, then plug it back in. 3. Check that the water supply tap is open and the supply line behind the fridge is not kinked. 4. If F34 returns, stop using the dispenser and call us. Do not open the dispenser housing.

! Why to stop there

Solenoid resistance has to be measured with a meter before the display module is blamed
The display module is inside the door or panel and carries line-level circuits
Replacing the module first can waste money if the solenoids are the cause

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Refrigerator codes

Ice maker PCB LED: 3 flashesFisher & Paykel ActiveSmart Refrigerator Code Ice maker PCB LED: 3 flashes: Temperature sensor too hot Ice maker PCB LED: 4 flashesFisher & Paykel ActiveSmart Refrigerator Code Ice maker PCB LED: 4 flashes: Temperature sensor too cold or open Ice maker PCB LED: 5 flashesFisher & Paykel ActiveSmart Refrigerator Code Ice maker PCB LED: 5 flashes: Water solenoid current high Code 40Fisher & Paykel ActiveSmart Refrigerator Code 40: Ice Maker Solenoid Transistor 1 Short Code 41Fisher & Paykel ActiveSmart Refrigerator Code 41: Ice Maker Solenoid Transistor 2 Short Code 42Fisher & Paykel ActiveSmart Refrigerator Code 42: Fill Tube Heater Current High Code 43Fisher & Paykel ActiveSmart Refrigerator Code 43: Fill Tube Heater Open F30Fisher & Paykel ActiveSmart Ice & Water Code F30: Ice Maker Display Receives No Signal

F34F34 questions

What are the solenoid drivers?

They are the circuits on the display module that switch the water dispenser solenoids on. F34 says both driver 1 and driver 2 have failed.

Will the refrigerator still keep food cold?

The code concerns the water dispenser circuit. Cooling is a separate system, but have the code checked so the dispenser and ice features work again.

What will you check first?

The resistance of the solenoids, and if they test correctly, the display module. We give the price in writing before work, with a 30-day workmanship warranty.