Fisher & Paykel Oven Code F1 03: Clock Board General Software Error

What F1 03 means

Fisher & Paykel OB24 and OB30 Series 7 and 9 built-in ovens, including the OB30SDPTX1 and OB30SDPTDX2, show F1 03 when the clock board reports a general software error. The clock board's program hit an unexpected condition. Power cycling the oven is the first step, and a clock board replacement is the remedy if it keeps coming back. The display shows F1 03.

Common causes of F1 03

A one-time software hiccup on the clock board
A power disturbance during operation
A clock board whose program is failing repeatedly
Moisture or heat affecting the clock board

✓ One safe check you can try

1. Turn the oven off at the breaker, wait a minute, and switch it back on. 2. Set the clock and run a short bake. 3. If the code does not return, keep using the oven normally. 4. If F1 03 repeats, leave the oven off and call us. Please do not take apart the control panel.

! Why to stop there

A control that fails again after a power cycle usually needs replacement.
The clock board sits in the control housing near live circuits.
We confirm it is the board before replacing it.
You get a written price first and a 30-day workmanship warranty afterward.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

F1 03F1 03 questions

Does a software error mean I need an update?

Not in the way a phone does. It means the clock board's program hit a problem. A power cycle often clears it; if not, the board is usually replaced.

It cleared by itself. Should I worry?

A single occurrence is usually harmless. If it reappears over days or weeks, the clock board is getting worse, and it is best to have it replaced before it fails fully.

Does heat from baking matter?

Yes, it can. Heat and condensation stress the electronics, so repeat codes during long cooking sessions are worth mentioning when you call. It helps us decide whether to bring a clock board.