Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Fisher & Paykel specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 322-9727 Request a Repair
Model library · Fisher & Paykel Cooktop

CG365DLPX1

Fisher & Paykel CG365DLPX1 Lpg Wok Burner Cooktop Repair

Fisher & Paykel cooktop

Most common issues on this model

  1. Igniter clicking without lighting on one or more burners
  2. Uneven flame or a burner not staying lit at low heat
  3. Wok burner not igniting because of debris in the burner base
  4. Re-ignition sensor misbehaving after a spill

The CG365DLPX1 combines a 36-inch, five-burner layout with a dual wok burner and a liquid propane setup, which suits country homes with an outside tank and cooks who like high heat. Most calls we get are mechanical rather than electronic: a dirty burner base, a damp igniter or a cap out of position.

The wok burner has two flame rings, so debris in the base is the common reason it will not light. Automatic re-ignition adds a sensor that can be confused by a spill, which is why we dry and clean around it. We also watch how the flame behaves on propane, since a lifting or yellow flame points to the gas setup rather than dirt.

If you smell gas, leave the house and call the gas supplier from outside. Written price first, 30-day warranty after.

Key features

  • 36-inch gas cooktop with five sealed burners
  • Liquid propane
  • Dual wok burner
  • Innovalve technology for flame control
  • Cast-iron trivets and automatic re-ignition
→Codes

Error codes this model can show

CG365DLPX1CG365DLPX1 questions
The wok burner will not light but the others do. Why?

Debris in the wok burner base, a damp igniter or a cap out of place are the usual causes. We lift the burner, clean the base thoroughly, dry it and test ignition at both rings.

What does automatic re-ignition do, and why does it fail?

It sparks again if the flame goes out. A spill can wet the igniter or sensing area and stop that from working. We clean and dry the area and test the response.

Why do some burners go out on a low setting on propane?

Low flame on propane is touchy. A clogged port, a loose cap or a regulator problem can cause it. We clean the burner, check the supply pressure and test the valve at its lowest setting.

Book a visit

Book repair for your CG365DLPX1

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Request a Repair