Fisher & Paykel CG151DNGGB5 15-inch Single Burner Gas Module Repair
The CG151DNGGB5 is a 15-inch natural gas module with a single sealed burner, and it appears in kitchens that go induction for most cooking but keep one live flame for charring or wok work. It sits between larger modules, so access from the cabinet below depends on how the neighbors were installed.
With a single burner, there is nothing to compare against. When it fails to light or burns poorly, the cause is the burner itself: a damp igniter, a blocked port or a cap that is not seated flat. We clean, dry and test, then run the flame from high to low. A valve that feels stiff or sticky after years of use gets attention from below.
If you smell gas, leave the house and call the gas utility from outside. Prices are written before work, and repairs come with a 30-day warranty.
Check that the cap is seated flat and wipe any moisture off the burner top. If clicking continues, call us. We clean the igniter and ports and test the spark and gas flow.
The cast trivet is designed for the burner, but heavy pans stress the grate and the cap. If the flame seems blocked or lifts under a wok, we check port cleanliness and cap fit.
Years of heat and cooking residue can stiffen a gas valve. A stiff valve should be looked at rather than forced. We service it from below and replace it if it cannot move freely and shut off fully.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
