Fisher & Paykel Built-In Dishwasher Code A20: drain problem

What A20 means

On Fisher & Paykel built-in dishwashers from the DW24U and DW60 platform, including the DW24U6I1 and DW24UT2I2, A20 is a drain error. The dishwasher cannot empty its water in the expected time. Listed causes are a crimped or bent drain hose, a blocked drain connection, a dirty turbidity sensor, or a blocked drain pump. Owners see A20 and standing water in the tub.

Common causes of A20

Drain hose crimped or bent
Blocked connection at the sink drain or disposal
Dirty turbidity sensor
Blocked drain pump

✓ One safe check you can try

1. Switch the dishwasher off. Remove the lower rack and clean the filter under the spray arm. 2. If you have a garbage disposal, run it clear and check the knockout plug is removed. 3. Check that the drain hose is not kinked behind the unit. 4. Switch on again and restart. If A20 returns, call us.

! Why to stop there

Pump and sensor cleaning needs the tub or lower panel opened.
Standing water can hide food debris or broken glass near the drain.
You see the price on paper first; the repair then comes with our 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other DishDrawer & Dishwasher codes

F30Fisher & Paykel Built-In Dishwasher Code F30: flooding switch activated F40Fisher & Paykel Built-In Dishwasher Code F40: water flow error F50Fisher & Paykel Built-In Dishwasher Code F50: electronics error F90Fisher & Paykel Built-In Dishwasher Code F90: data or electronics error FA0Fisher & Paykel Built-In Dishwasher Code FA0: electronics or power supply A70Fisher & Paykel Built-In Dishwasher Code A70: temperature sensing alarm FFFisher & Paykel DishDrawer Code FF: top tub not responding A80Fisher & Paykel Built-In Dishwasher Code A80: turbidity sensing alarm

A20A20 questions

Why is there water left in the tub with A20?

A20 means the dishwasher could not pump out its water. A kinked drain hose, a clogged sink connection or a blocked pump leaves water in the bottom.

Can I clean the drain pump myself?

We would rather you did not. Rinsing the filter is safe, but reaching the pump means opening the lower area with live wiring and water lines nearby, which is a technician's job.

Will you check the sink connection too?

Yes. We look at the hose route, the sink connection and the disposal, because a blockage outside the machine is a common reason for A20. You get a written price first.